處理器
擴大機
喇叭
超低音
配件
IK W8 定價HKD＄1990
200 mm / 8 inch subwoofer with 2 x 2 Ohms or 1 x 2 Ohms voice coil for compact enclosures
 |
|---|
 |
 |
Product Speclflcation
IK W8
Stunning bass performance out of compact dimensions
With the new KW chassis, we’re expanding our IMPACT subwoofer lineup, offering powerful drivers for use in very compact enclosures. Especially when it comes to the most efficient usage of available space in the vehicle regarding an individual enclosure design, these woofers create completely new installation possibilities without ever compromising the acoustic performance.
Clever down to the last detail
The extremely stiff cone made of hand-scooped paper fibers in connection with the heavy-duty driver system not only converts amplifier power easily and without compression effects into loads of sound pressure, but also scores sonically with subtle beats.
Flexible connection – 2 x 2 or 1 x 2 Ohms
The chassis are available as 1 x 2 Ohms (SVC2) or 2 x 2 Ohms (DVC2) version. Thus, these subwoofers always offers the right solution for every amplifier configuration to get the maximum performance out of it – whether mono, 2-channel or even multi-channel amplifier.
"All inclusive" for self-made enthusiasts
In addition, the solid protective grille and gasket are also included. For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency as well as DSP settings in our technical data sheet.
Specliflcation
Power RMS / max.
Impedance
DC resistance
Resonance frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Compliance
Equivalent air volume
Force factor
Sensitivity
Cone area
Moving mass
Cone material
Mechanical resistance
Voice coil diameter
Voice coil winding height
Max. linear excursion
Outer diameter
Installation diameter
Installation depth
Recommended case volumes
closed housing
net volume
Lower cutoff frequency (-3dB)
Recommended DSP settings
Bass reflex enclosure
net volume
Reflex channel diameter
Reflex channel surface
Reflex channel length
tunnel tuning frequencycolor
Lower cutoff frequency (-3dB)
Recommended DSP settings
P
Z
Re
Fs
Qms Qes
Qts
Cms
Vas
B*I
SPL
Sd
Mms
Rms
ø
Xmax
ø
ø
300 / 600 Watts
2 x 2 Ω
2 x 1.6 Ω
37 Hz
3.56
0.46
0.41
262 μm/N
17 L
10.7 Tm
89.0 dB @ 2.83V / 1m
86.0 dB @ 1W / 1m219 cm²
219 cm²
69 g
Hand-scooped paper cone
4.54 kg/s
50.8 mm
24 mm
+/- 8.0 mm
213.5 mm / 8.40"
182 mm / 7.17"
101 mm / 3.98"
8 L
50 Hz
Recommended "Self-Define" high-pass filter with 50 Hz cutoff frequency and Q = 1.5,additional EQ filter 115 Hz / Q = 1.0 / -2.5 dB
8L
60 mm / 2.36"
28 cm²
42 cm / 16.5" (angled port)
43 Hz
45 Hz
Recommended "Self-Define" high-pass filter with 43 Hz cut-off frequency and Q = 1.5,additional EQ filter 120 Hz / Q = 0.8 / -3.5 dB
Features
-
2 x 2 Ohms dual voice coil for flexible system configuration
-
Extremely stiff, hand-scooped paper cone for outstanding impulse response
-
Double ventilated voice coil for minimum compression effects and high power handling
-
Long-excursion rubber surround for highest mechanical rating
-
Solid push terminals
-
Powerful magnet system for compact enclosures
-
Rugged magnet cover with HELIX lettering for perfect magnet protection
-
Grille and gasket included in delivery